Rust
- Steel joists and structures
- Ramps, guardrails and stairs
- Doors, frames and equipment
New · Laser cleaning and stripping
Laser rust and paint removal in Ottawa and Gatineau
Rust, old paint, varnish: our laser strips the coating layer by layer from steel, wood and many other surfaces. No sandblasting, no chemical strippers.
- Rust, paint and varnish
- Steel, wood and other surfaces
- RBQ licensed
What the laser removes
The beam strips rust and coatings without touching what's around them. The surface is left clean and ready to be repainted or restored.
Old paint
- Peeling or blistering paint
- Coatings that need a full redo
- On metal and other surfaces
Varnish and stain
- Woodwork and trim
- Wooden doors and furniture
- Pieces to restore
Before repainting
- A truly clean surface
- Paint that holds better
- Stripping and painting by the same crew
A cleaner alternative to sandblasting
Sandblasting throws an abrasive that has to be cleaned up afterwards, and chemical strippers leave products that have to be disposed of. The laser uses neither: light does the stripping.
The laser isn't always the best choice: on very large surfaces, another method can cost less. Send us a photo and we'll tell you honestly.
- No abrasiveNo sand or grit to clean up after the job.
- No chemicalsNo stripper to apply, rinse off or dispose of.
- PreciseWe strip a specific area without damaging the surfaces next to it.
- Ready to repaintWe're painters first, so we can move straight on to the paint or finish.
How it works
A photo of the surface is all it takes to get started.
-
Send us a photo
Through the form or to info@peinturesp.com, with a few words about what needs stripping.
-
We tell you if the laser fits
Based on the surface and the coating, we recommend the right method and send you a quote.
-
The stripping
Our crew puts safety measures in place that are specific to each job site.
-
The finish, if you want it
Paint, primer or varnish: the same crew finishes the job.
Laser cleaning across the National Capital Region
SP Painting is based at 307 chemin Industriel in Gatineau. We offer laser cleaning everywhere in Ottawa and Gatineau.
- Ottawa
- Gatineau
- Hull
- Aylmer
- Buckingham
- Masson-Angers
What can the laser remove?
Rust, old paint and varnish, from steel, wood and many other surfaces. Send us a photo of the surface to find out if the laser is a good fit.
Can the laser replace sandblasting?
In many cases, yes: it removes rust and paint with no abrasive and no chemicals. On very large surfaces, another method can cost less; we'll advise you based on your project.
Can you repaint after the stripping?
Yes. We're painters first: we can strip with the laser, then apply the paint or finish with the same crew.
How do I know if the laser will work on my surface?
Send us a photo of the surface with the form or to info@peinturesp.com. We'll tell you if the laser is the right method.
Where do you offer laser cleaning?
In Ottawa, in Gatineau and across the National Capital Region.
A quote for laser cleaning
Attach a photo of the surface and tell us what needs to come off. Prefer to talk to someone? Give us a call.
- Phone
- 819 281-1999
- info@peinturesp.com
- Address
- 307 chemin Industriel
Gatineau, Quebec J8R 0C6